Customer Center
Login | Register

Luminex Learning Field Service Engineers Sessions

The Luminex Learning Sessions are comprehensive suites of educational courses that are ideally suited for Field Service Engineers and will provide them with an understanding of their instruments technology, software, hardware as well as recommended maintenance and tips for troubleshooting. The courses are taught as-needed and can be requested here. Before requesting a course, please review the course pre-requisites to see if you are eligible.

Agenda

Agenda for the 2018 Luminex Learning Field Service Engineers Sessions

 

 

FLEXMAP 3D® Basic Field Service Classroom Training Course

 

Course Online Pre-Requisites
  1. xPONENT® Online Training – This 15 minute course provides instruction and information about xPONENT functions. It provides details about the use of xPONENT software, different versions of xPONENT software, and the various functions that can be performed on xMAP® instruments from xPONENT software.
  2. Laser Safety Online Training – This 15 minute course shows the user information on Laser Safety in a self-paced and interactive online setting where the end-user receives important information through audio and visual aids. It also contains instruction on Laser Safety, laser classifications and control measures and causes of laser accidents.
  3. Electrostatic Discharge Online Training – This 15 minute course shows the user information on Electrostatic Discharge Safety in a self-paced and interactive online setting where the end-user receives important information through audio and visual aids. It also contains instruction on Electrostatic Discharge, how to control it and how to prevent it.
  4. xMAP Technology Overview Online Training – Trainees assigned to this course will view the online training module and complete the course evaluation. Upon successful completion of this course trainees are able to:
    • Identify what the xMAP acronym stands for
    • Define carboxyl groups
    • Describe Nucleic Acid Coupling
    • Describe Protein Coupling
    • Identify the Luminex Instruments that utilize xMAP Technology
    • Summarize how Luminex xMAP Technology works

 

Day 1 Course Topics
  • Luminex Technology
  • Luminex xMAP Technology
  • Introduction to the Instrument
  • Field Service Manual (Overview)
  • Decontamination Procedure
  • System Installation (With Swivel Arm & Touch Screen)
  • Technical Service Bulletins (TSBs)
  • Software Overview
  • System Construction
  • Remove Cover and Bezel
  • Power Supply
  • Electronics
  • Pneumatics
  • Fluidics
  • Mechanics
  • Startup Indicators
  • LxMaintenance Software
  • Auto Probe Height Calibration (Including Height Adjustment Tool)
  • Introduction to Calibration and Verification
  • Control Trend Reports Introduction

 

Day 2 Course Topics
  • Creating Custom Setup In Service Software
  • Load System Information into NV RAM
  • Changing Firmware
  • Preventative Maintenance
  • Draining Fluidics Bay
  • Declog Cuvette/Injection Needle
  • Verify/Adjust Flow Rate
  • Verification Procedure
  • Calibrate XY Heaters/Well Alignment
  • Remove and Replace
  • Troubleshooting-Symptoms and Causes
    • Diagnostic, System Troubleshooting & Repair-Electronics

 

Day 3 Course Topics
  • Optics Theory
  • Histogram and Dot Plot
  • Optics Assembly
  • O-Scope Setup and Use
  • Optical Alignment-1 (Classification Channel)
    • Side to Side Adjustment, Focal Turns, Classification Dot and Laser Offset (Split)
  • Red Laser Replacement
    • Course & Fine Adjustment w/O-Scope and Dot Plot
  • Control Trend Report for Classification Channel
  • Optics Troubleshooting

 

Day 4 Course Topics
  • Optics Assembly
  • Optical Alignment-1 (Reporter Channel)
    • Side to Side Adjustment, PMT Dot
  • Green Laser Replacement
    • Course & Fine Adjustment w/O-Scope and Dot Plot
  • Control Trend Report for Reporter Channel
  • Optics Troubleshooting
  • Troubleshooting-Symptoms and Causes
    • Diagnostic, System Troubleshooting, & Repair-Optics

 

Day 5 Course Topics
  • Advanced Maintenance Software Functions
  • End User Software (Overview)
  • Probe Height & Instrument Calibration (End User Software)
  • Tools and Reagents
  • Review
  • Final Test

 

Luminex® 200™ Basic Field Service Training

 

Course Online Pre-Requisites
  1. xPONENT® Online Training – This 15 minute course provides instruction and information about xPONENT functions. It provides details about the use of xPONENT software, different versions of xPONENT software, and the various functions that can be performed on xMAP® instruments from xPONENT software.
  2. Laser Safety Online Training – This 15 minute course shows the user information on Laser Safety in a self-paced and interactive online setting where the end-user receives important information through audio and visual aids. It also contains instruction on Laser Safety, laser classifications and control measures and causes of laser accidents.
  3. Electrostatic Discharge Online Training – This 15 minute course shows the user information on Electrostatic Discharge Safety in a self-paced and interactive online setting where the end-user receives important information through audio and visual aids. It also contains instruction on Electrostatic Discharge, how to control it and how to prevent it.
  4. xMAP Technology Overview Online Training – Trainees assigned to this course will view the online training module and complete the course evaluation. Upon successful completion of this course trainees are able to:
    • Identify what the xMAP acronym stands for
    • Define carboxyl groups
    • Describe Nucleic Acid Coupling
    • Describe Protein Coupling
    • eIdentify the Luminex Instruments that utilize xMAP Technology
    • Summarize how Luminex xMAP Technology works

 

Day 1 Course Topics
  • Luminex Technology
  • Luminex xMAP Technology
  • Introduction to the Instrument
  • Field Service Manual (Overview)
  • Decontamination Procedure
  • System Installation
  • Technical Service Bulletins (TSBs)
  • Software Overview
  • Probe Height Alignment
  • System Construction
  • Remove Cover and Bezel
  • Power Supply
  • Electronics
  • Pneumatics
  • Fluidics
  • Startup Indicators
  • LxMaintenance Software
  • Introduction to Calibration and Verification
  • Control Trend Reports Introduction
  • Review

 

Day 2 Course Topics
  • Review of Software, Fluidics, Pneumatics, Electronics, and Power
  • Load System Information into NV RAM
  • Changing Firmware
  • Preventative Maintenance
  • Declog Cuvette/Injection Needle
  • Verify/Adjust Flow Rate
  • Verification Procedure
  • Remove and Replace
  • Troubleshooting-Symptoms and Causes
    • Diagnostics
    • System Troubleshooting
    • Repair

 

Day 3 Course Topics
  • Optics Theory
  • Histogram and Dot Plot
  • Optics Assembly
  • O-Scope Setup and Use
  • Optical Alignment-1 (Classification Channel)
    • Side to Side Adjustment
    • Focal Turns
    • Laser Offset (Split)
  • Red Laser Replacement
    • Course & Fine Adjustment
    • O-Scope and Dot Plot Usage
  • Control Trend Report for Classification Channel
  • Optics Troubleshooting

 

Day 4 Course Topics
  • Optical Alignment-1 (Reporter Channel)
    • Side to Side Adjustment
    • PMT Dot
  • Green Laser Replacement
    • Course & Fine Adjustment
    • O-Scope and Dot Plot Usuage
  • Control Trend Report for Reporter Channel
  • Optics Troubleshooting
  • Troubleshooting-Symptoms and Causes
    • Diagnostics
    • System Troubleshooting
    • Repair-Optics
  • Review-Classification & Reporter Optics-Troubleshooting & Repair

 

Day 5 Course Topics
  • Advanced Maintenance Software Functions
  • XYP
  • SDS
  • Tools and Reagents
  • Review
  • Final Test

 

Luminex® 200™ RoHS Field Service Training

Note: Luminex requires that the Luminex 200 Basic Field Service Training Class has been completed prior to attending this class.

 

Course Online Pre-Requisites
  1. Luminex® 200™ Optical Alignment Video Online Training – This video provides information about Luminex 200 updates for “L-Block” alignment.
  2. Laser Safety Online Training – This 15 minute course shows the user information on Laser Safety in a self-paced and interactive online setting where the end-user receives important information through audio and visual aids. It also contains instruction on Laser Safety, laser classifications and control measures and causes of laser accidents.
  3. Electrostatic Discharge Online Training – This 15 minute course shows the user information on Electrostatic Discharge Safety in a self-paced and interactive online setting where the end-user receives important information through audio and visual aids. It also contains instruction on Electrostatic Discharge, how to control it and how to prevent it.
  4. xMAP Technology Overview Online Training – Trainees assigned to this course will view the online training module and complete the course evaluation. Upon successful completion of this course trainees are able to:
    • Identify what the xMAP acronym stands for
    • Define carboxyl groups
    • Describe Nucleic Acid Coupling
    • Describe Protein Coupling
    • eIdentify the Luminex Instruments that utilize xMAP Technology
    • Summarize how Luminex xMAP Technology works

 

Day 1 Course Topics
  • Introduction to the Luminex 200 RoHS System
  • Optics Assembly Overview
  • LxMaintenance Software 3.2.111
  • Calibration and Verification
  • O-Scope Setup and Use
  • Observation of Alignment Procedure

 

Day 2 Course Topics
  • Review of Day 1
  • Issuance of Alignment Jigs
  • Optical Alignment
    • Gapping
    • Side to Side Adjustment
    • Focal Turns
    • Laser Offset
  • Red and Green Laser Replacements
    • Course Adjustment
    • Fine Adjustment
    • O-Scope and Dot Plot Usage
  • Overall diagnostics and system review

 

MAGPIX® Basic Field Service Training

 

Course Online Pre-Requisites
  1. xPONENT® Online Training – This 15 minute course provides instruction and information about xPONENT functions. It provides details about the use of xPONENT software, different versions of xPONENT software, and the various functions that can be performed on xMAP® instruments from xPONENT software.
  2. xMAP Technology Overview Online Training – Trainees assigned to this course will view the online training module and complete the course evaluation. Upon successful completion of this course trainees are able to:
    • Identify what the xMAP acronym stands for
    • Define carboxyl groups
    • Describe Nucleic Acid Coupling
    • Describe Protein Coupling
    • eIdentify the Luminex Instruments that utilize xMAP Technology
    • Summarize how Luminex xMAP Technology works
  3. Electrostatic Discharge Online Training – This 15 minute course shows the user information on Electrostatic Discharge Safety in a self-paced and interactive online setting where the end-user receives important information through audio and visual aids. It also contains instruction on Electrostatic Discharge, how to control it and how to prevent it.
  4. MaintPix Training Video – This 1 hour click-through style training will guide you through many common maintenance commands and routines in the MaintPix software, and give you an overview of the software layout to familiarize yourself before class.

 

Day 1 Course Topics
  • Introduction to the Instrument
  • System Installation
  • System Overview
  • Hardware
  • Optics
  • XZ Assembly
  • Y Assembly
  • Fluidics Overview
  • Electronics Overview
  • Startup Indicators
  • MaintPix Software Overview
  • Introduction to Calibration and Verification
  • Calibration and Verification Reports
  • Review

 

Day 2 Course Topics
  • Preventative Maintenance & De-Clogging Routine
  • Firmware Download Tool
  • Field Service Support Material
  • Remove and Replace Power Supply
  • Remove and Replace Sample Delivery Module (SDM) Components
    • Remove and Replace Y-axis Assembly
    • Remove and Replace Y-axis Motor and Encoder
    • Remove and Replace XZ-axis Assembly
    • Remove and Replace X-axis Motor and Encoder
    • Remove and Replace XYZ PCBA
  • X-axis and Y-axis Calibration
  • Error Decoder Tool / Support Utility Files
  • Error Symptoms and Corrections: Sample Delivery Module (SDM)
  • Hands On Troubleshooting and Repair
  • Review

 

Day 3 Course Topics
  • Remove and Replace Optics Control Module (OCM) Components
    • Remove and Replace Optics Assembly
    • Remove and Replace CCD Processor PCBA
    • Remove and Replace Optics Controller PCBA
    • Remove and Replace Magnet and Actuator Motor
    • Remove and Replace Focus Motor
  • Error Symptoms and Corrections: Optics Control Module (OCM)
  • Hands on Troubleshooting and Repair
  • xPONENT Software Overview
  • Final Review
  • Final Test
  • Test Review
  • Reference Documents

 

Location and Directions

Location

 

Luminex Corporate Headquarters
12212 Technology Blvd.
Austin, TX 78727

 

Located in northwest Austin, Luminex is approximately 30 minutes from the airport by car, shuttle, or taxi.

Directions

 

Location

 

Luminex Shanghai Office
14/F C&D, Building 7, Pujiang Hi-Tech Park 2388 Chenhang Road, Minhang District
Shanghai 201114 China

 

Directions

 

Luminex China Office

Location

 

Luminex B.V.
Het Zuiderkruis 1
5215 MV ‘s-Hertogenbosch
The Netherlands

 

Directions