Customer Center
Login | Register

FLEXMAP 3D® SUPPORT

General Routines

System Initialization Routine

FlexMap 3D® System Initialization Routine

 
Learn how to run the system initialization routine on the FLEXMAP 3D® to prepare the instrument for use.

 

Standards & Controls

FlexMap 3D® Standards Controls

 
Learn how to add standards & controls to a protocol using xPONENT® 4.2 for FLEXMAP 3D.
 

 

Create a Batch from Existing Protocols

FlexMap 3D® Create a Batch from an Existing Protocol

 
Learn how to create a batch from an existing protocol using xPONENT 4.2 for FLEXMAP 3D.
 

Probe Height Adjustment

FlexMap 3D® Probe Height Adjustment

 
Learn how to use the probe height adjustment tool for 384-Well Plates on the FLEXMAP 3D.

Shutdown the Analyzer

FlexMap 3D® Shutdown the Analyzer

 
Learn how to shutdown the analyzer for FLEXMAP 3D software for up to a week in order to clean and flush fluidics.

Maintenance

Following the Maintenance Schedule

FlexMap 3D® Following the Maintenance Schedule

 
Watch this video to learn about following the maintenance schedule for FLEXMAP 3D.

 

Clean the Sample Probe

FlexMap 3D® Clean the Sample Probe

 
Here is a video to learn how to clean the sample probe for FLEXMAP 3D.
 

 

Replacing the Teflon Syringe Seal

FlexMap 3D® Replacing the Teflon Syringe Seal

 
Learn how to replace the Teflon Syringe Seal on the FLEXMAP 3D.
 

Replacing the HEPA Filter

FlexMap 3D® Replacing the HEPA Filter

 
Watch this video to learn how to replace the HEPA Filter on the FLEXMAP 3D.
 

Replacing the Sheath Fluid Filter

FlexMap 3D® Replacing the Sheath Fluid Filter

 
Watch this video to learn how to replace the Sheath Fluid Filter on the FLEXMAP 3D.

Replacing the Fuses

FlexMap 3D® Replacing the Fuses

 
Learn how to replace the fuses on the FLEXMAP 3D.
 

Removing and Replacing the Ventilation Filters

FlexMap 3D® Removing and Replacing the Ventilation Filters

 
This video will show you how to remove and replace the ventilation filters on the FLEXMAP 3D.

Troubleshooting

Run a Clog Removal Routine

FlexMap 3D® Run a Clog Removal Routine

 
Watch this video to learn how to run a clog removal routine with xPONENT for FLEXMAP 3D Software Version 4.2